System requirements | Photoshop Elements.Note: Time Lapse sequence settings are accessed under the VIDEO tab in the SET menu, while frame rate and resolution are access by pressing the little chevron button to the left of the shutter button. The button will change color from yellow to white and "-L" will be appended to the end. To do so, press the M button on the secondary toolbar and long press the AE button, the AF button, and the AWB button. It is recommended that you lock focus, exposure, and WB.To avoid interruptions, switch flight mode ON.To conserve power, set the time lapse screen brightness option to a level where the screen is as dim as possible while still being visible. Make sure your phone is fully charged.To avoid camera shake at the start of a sequence, make use of the start delay option which is set to 10 sec by default.The higher the fps (60 fps versus 24 fps), the faster the sequence. Playback speed is also dependent on the frame rate. The longer the time lapse interval (10 sec versus 1 sec), the faster the effect.The duration of the final video is equal to the number of frames captured divided by the frame rate.Tips for capturing the perfect time lapse video: For example, a scene can be captured once every second, then played back at 60 frames per second (FPS). When the video is played back, time appears to be moving much faster than normal. Time lapse is a cinematography technique in which the frequency of frames captured is significantly lower than that used to playback the sequence. Note: Because of the intensive processing requirements, it is recommended that users close all open apps in the multitasking menu and restart their device. Some editing software may not support the higher resolution and quality.File size up to 4x as large as standard 4K video.High speed 60 fps frame capture not supported.We recommend the use of a tripod or a gimbal. Neither digital nor OIS video stabilization are supported.Significantly wider view angle due to the lack of digital stabilization.4K Max has a 10% higher pixel count than standard 4K.4K Max videos are encoded at a bitrate of ~150mbps, 3x the quality of native iOS 4K.Stereo audio is captured independently and added to the video in post processing.On iPhone 6s and later, frames are cropped in realtime from a 4:3 aspect ratio of 4032x3024 to a 16:9 aspect ratio of 4032x2268 (10% higher pixel count than standard 4K) and combined into a video.12MP photos are captured at up to 30 fps on iPhone 6s and later.Double tap the AE slider to reset the AE value back to 0. Note: The AE value does not reset back to 0 when auto mode is initiated as it is already in auto mode. The default value is 0, which means that no changed were made to ISO or shutter speed. The camera will automatically and continuously adjusts ISO and shutter speed to achieve the selected exposure value. Note: While in auto mode, the exposure (AE) value can be set between -8 and 8+. Alternatively, double tap the camera view to reset all parameters back to auto. The exposure button will change to a yellow AE, indicating it is in auto mode. To reset exposure back to auto mode, press the AE-L button. When either shutter speed or ISO are manually adjusted, the exposure button changes from a yellow AE to a white AE-L, indicating that exposure is locked and no longer in auto mode. Note: While shutter speed and ISO can be manually adjusted on iPhone, the aperture is fixed. Aperture controls the amount of light allowed to reach the sensor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |